Raspberry Pi Desktop Tower Case free 3d print model download

I setup a Raspberry Pi 3 to experiment with ROS, OpenCV, and whatever else I felt like looking into, and I wanted a desktop case for it. I started trying to duplicate the look of the Intel NUC stuff, but ended up doing a ?micro? version of a desktop PC tower case.The basic specs for the setup are: Raspberry Pi 3 with WD Pi drive (314GB) as the boot disk. (No SD card at all) Pi camera Adafruit audio amp driving stereo speakers (Okay, they are a bit close together.) Pi and HD LED?s moved to the front panel. Adafruit 128?64 OLED display and four buttons. Used for menu system to start stuff, show status, and reboot/shutdown system. All Pi USB & Ethernet ports brought out to panel mount sockets. Pi serial console port connected to USB serial adapter on back panel. Variable speed cooling fan, speed based on CPU temp. Raspberry Pi logo on case side. Clear removable window on other case side.Print SettingsPrinter Brand:MakerBotPrinter:MakerBot ReplicatorRafts:NoSupports:NoResolution:.3mm 2 extra shellsInfill:15%Notes:The Pi logo overlay is printed at .2mm with 1 extra shell and 20% infill. All the other pieces as above.Post-PrintingNeeded Parts Raspberry Pi 3 with WD Pi drive and camera 6? USB cable for Pi drive: https://www.newegg.com/Product/Product.aspx?Item=N82E16812423073 12? USB to panel mount: https://www.newegg.com/Product/Product.aspx?Item=N82E16812200475 Two 6? USB tp anel mount: https://www.newegg.com/Product/Product.aspx?Item=N82E16812228774 Adafruit Perma-Proto HAT for Pi: https://www.adafruit.com/product/2310 Adafruit 1.3? 128?64 OLED display: https://www.adafruit.com/product/938 Adafruit Stacking Header: https://www.adafruit.com/product/1979 Adafruit stereo amp: https://www.adafruit.com/product/1552 Adafruit 12? F-F jumper wires: https://www.adafruit.com/product/793 Adafruit 6? F-F jumper wires: https://www.adafruit.com/product/266 Adafruit RtAng 3.5mm Stereo to Pigtail: https://www.adafruit.com/product/1700 6 pcs 3mm x 10mm cap screws (To attach USB panel mounts) 25 pcs #2 x 3/8? screws (To assemble case & Pi/drive mounts. 8 pcs #2 x 14? screws for display and Pi 4 pcs #1 x 1/4? screws to mount the camera 4 pcs #2 x 1/2? screws to mount the feet 4 pcs #1 x 3/8? screws to mount the fan (Can use hot glue) FTDI UM232R USB to serial module (For Pi serial console): https://www.digikey.com/product-detail/en/ftdi-future-technology-devices-international-ltd/UM232R/768-1019-ND/1836397 5? of CAT5 cable Crimp on RJ45: http://www.homedepot.com/p/Ideal-RJ-45-8-Position-8-Contact-Category-5e-Modular-Plugs-25-per-Card-85-346/100012932 RJ45 wall plate jack: http://www.homedepot.com/p/CE-TECH-Category-5e-Jack-White-10-Pack-5025-WH-10/204410618 Two 29mm Mini speakers: https://www.radioshack.com/products/radioshack-8-ohm-mini-speaker Four SMT switches: https://www.radioshack.com/products/spst-12vdc-smt-tact-switch-1 24: 5V 40mmx10.5mm fan: https://www.digikey.com/product-detail/en/orion-fans/OD4010-05MB/1053-1202-ND/2621107 P2N2222A NPN transistor, or equivalent. 1.5K 1/4W resistor, leaded. 1N4001 Diode .1? header socket: https://www.adafruit.com/product/598AssemblyInstructions in progress?Software SetupInstructions in progress?Credits:JoeyC Rate this 3D modelDownload 3D modelsFileFile size Raspberry_Pi_Desktop_Tower_Case2 MB

Raspberry Pi Desktop Tower Case free 3d print model download