3D model download
Powerbank DIY 12000-16000 mAh 2.1A free 3d print model download
I made a powerbank for 18650 batteries, 4 of them. Please enjoy, there is a youtube video for the assambley (PART 2). There are three different lids for it, if you wish to replace it after a while of use. Its 2.1A USB pcb-board so you can charge an ipad withou
- Model code
- 2764
5.00 USD
ABOUT THIS MODEL
Description & specifications
I made a powerbank for 18650 batteries, 4 of them. Please enjoy, there is a youtube video for the assambley (PART 2). There are three different lids for it, if you wish to replace it after a while of use. Its 2.1A USB pcb-board so you can charge an ipad without problems.You can buy the parts for the powerbank here: USB-PCBboard Battery-holder Battery 4000 mAh Battery 3000 mAhPrint SettingsPrinter:prusaRafts:NoSupports:NoResolution:0.2Infill:20%Credits:thenomadsoul_ Rate this 3D modelDownload 3D modelsFileFile size Powerbank_DIY_12000-16000_mAh_2.1A10 MB
Powerbank DIY 12000-16000 mAh 2.1A free 3d print model download
