3D model download
Playstation VR (PSVR) Stand free 3d print model download
I built this one to give my PSVR a nice stand with a design I like.Print SettingsRafts:NoSupports:NoNotes:The top part is fixed to the base by screws. I used some with 4mm outer diameter and 3mm inner diameter. The screws should cut their own thread but you ca
- Model code
- 2856
5.00 USD
ABOUT THIS MODEL
Description & specifications
I built this one to give my PSVR a nice stand with a design I like.Print SettingsRafts:NoSupports:NoNotes:The top part is fixed to the base by screws. I used some with 4mm outer diameter and 3mm inner diameter. The screws should cut their own thread but you can help them by carefully heating them with a lighter or similar.Prints without Supports.Since the base is too large for my limited z-axis travel capabilities (80mm) I cut the base in two. I uploaded both of these files and also the whole part for those with more travel or for those who want to cut it at another position. After printing I just glued the two parts together.Credits:hachiroku Rate this 3D modelDownload 3D modelsFileFile size Playstation_VR_PSVR_Stand2 MB
