3D model download
Phone Stand free 3d print model download
To complete this print you need an M3 set screw and an M3 insert. If you can?t find a set screw you can cut the head off from a 10mm M3 screw and insert(screw) it into the rod.I recommend it to use an insert nut because there will be less friction in the inser
- Model code
- 2296
5.00 USD
ABOUT THIS MODEL
Description & specifications
To complete this print you need an M3 set screw and an M3 insert. If you can?t find a set screw you can cut the head off from a 10mm M3 screw and insert(screw) it into the rod.I recommend it to use an insert nut because there will be less friction in the insert nut than the plastic. I simply heat the nut using my soldering iron and slide it into the hole.Print SettingsPrinter Brand:CrealityPrinter:Ender 2Rafts:NoSupports:YesResolution:0.2mmInfill:50% ? 100% Rate this 3D modelDownload 3D modelsFileFile size Phone_Stand32 MB
