Modular Surround Speaker free 3d print model download

After having made the Modular Sound Bar / Center Speaker I continued my project of making a full set of speakers using my 3D printer. You could already use the modules of the Sound Bar as stereo and surround speakers, but for my situation I needed the speakers to have a little stand. Once I had done that and hooked everything up I found the high frequencies lacking a bit with the speakers I used so I added a tweeter. This is the result, again fully printable without supports. If you compare the sound bar with this unit you will find that I used different speakers ? I have ran out of the units I got from China so I used some (more expensive) store bought (JayCar Australia) ones.As with the sound bar, please let me know how you go if you end up making these.Print SettingsPrinter Brand:WanhaoPrinter:Wanhao Duplicator i3 PlusRafts:NoSupports:NoResolution:0.2mmInfill:20%Post-PrintingYou will have to put everything together using small screws. I used the soldering iron to do all the connections. The tweeter has a 6uF bipolar capacitor connected in seriesHow I Designed ThisDesigned using TinkercadCredits:jongdepaul Rate this 3D modelDownload 3D modelsFileFile size Modular_Surround_Speaker459 KB

Modular Surround Speaker free 3d print model download