MinBase ? M5 Threaded Low Profile Action Camera Mount Base free 3d print model download

MinBase is a low profile action camera mount compatible with most action camera mount systems. Allows for 180? tilting up and down along the Y-axis. There is a version for the knob on the left and one for the right depending on what is more comfortable in any situation.Works well together with my EnCam, CrealiCam and PruCam things.I also published an SQ11mount for the SQ11 and an SQ12mount for the SQ12.Print SettingsPrinter Brand:PrusaPrinter:i3 MK2SRafts:NoSupports:NoResolution:0.2 mmInfill:25%, 5 perimeters, 5 bottom & top layersNotes:This is designed to print well without supports, rafts, brims or anything. Printed quite well on Prusa3D as well as Creality.Post-PrintingM5 is the new 1/4?Despite this being a camera mount I chose to divert from the usual 1/4? camera mount thread because at least where I?m based the metric threads are much more commonly available. I chose M5 to be specific for both threads. You will need at least M5x22 for the top thread and the bottom thread depends on what you mount the MinBase on. Rate this 3D modelDownload 3D modelsFileFile size MinBase_-_M5_Threaded_Low_Profile_Action_Camera_Mount_Base851 KB

MinBase ? M5 Threaded Low Profile Action Camera Mount Base free 3d print model download