3D model download
Magic Arm Stand free 3d print model download
A simple stand to be used with magic arms for either a tiny desk light or a phone clamp.Version 1 features fixed legs that cannot be folded. Requires 6 brass M3 x 4mm threaded inserts that are heat pressed into the core. Requires another 6 pieces of M3 x 8mm s
- Model code
- 938
5.00 USD
ABOUT THIS MODEL
Description & specifications
A simple stand to be used with magic arms for either a tiny desk light or a phone clamp.Version 1 features fixed legs that cannot be folded. Requires 6 brass M3 x 4mm threaded inserts that are heat pressed into the core. Requires another 6 pieces of M3 x 8mm screws to afix the legs to the core.Version 2 can be folded. Requires 2 brass M4 x 4mm threaded inserts to be heat pressed into the core. Another 2 pieces of M4 x 10mm countersunk screws are used as ?pivot points? for the legs.Both designs will fit a smallrig 1/4? to 3/8? screw adapter after boring out the centre hole of the core to about 8.7mm, one will be able to tightly screw in the adapter.https://www.smallrig.com/smallrig-1-4-to-3-8-screw-adapter-5-pcs-1610.htmlPrint SettingsPrinter: Flashforge Dreamer Rafts: No Supports: No Resolution: 0.3mm Infill: 50%Credits: Jack_Tay Rate this 3D modelDownload 3D modelsFileFile size Magic+Arm+Stand946 KB
