Huge Squirtle Raspberry Pi Case free 3d print model download

A huge beautiful looking case for you Raspberry Pi 3b+ To print this beast you need around 30-40 hours depending on your printer.What you need to print: 1x front 1x back 3x connectorsWhat you need to assemble it: 3x bigger screws to screw together the back and front part 2x small screws for inside the case (hold raspberry pi in place) some superglue and most importantly you need every cable (micro usb, hdmi, ethernet, usb) in low profile or you risk to not have enough space in the case!How to assemble: Glue the three connectors in either the top or back part Mount Raspberry Pi and do your cable management Stick front and back together and use the 3 screws (cut the connector a little if needed) Done. Now look awesome ?Print SettingsPrinter Brand:PrusaPrinter:i3 MK3Rafts:NoSupports:YesInfill:10%Notes:You only need supports with the back part. Infill 10% is more than enough. You need around 300-400m of plaCredits: jor_93 Rate this 3D modelDownload 3D modelsFileFile size Huge_Squirtle_Raspberry_Pi_Case1 MB

Huge Squirtle Raspberry Pi Case free 3d print model download