Desk Mount Headphone Holder / Mount / Clamp free 3d print model download

UPDATE: The ?Long? version of the screw could grip on to a 1mm table. It?s overkill but I wanted to ensure people had a choice that would work. The original screw leaves a 17mm gap so if your table or desk is thinner than 17mm, use the long screwI designed this as the above headphone mount cracked on me (I?ve made 5 and they all cracked in the same spot). Instead of asking the designer to change the design (many people haven?t had problems), I decided to try my hand at making my own.My design goals were to be smaller, stronger, and deeper grooves for the headphone cords than the excellent Monster Mouth Headphone Holder. I also wanted to remove any sharp edges so I didn?t scratch myself or my headphone ear seals while using the holder.Please post your comments and makes!Print SettingsPrinter:Hatchbox AlphaRafts:NoSupports:NoResolution:0.25mm (250 micron)Infill:20%Notes:At 0.25mm resolution, it took me about 3.5 hours to print the holder and screw. 20% infill seems to be fine in terms of strength.Credits:mistertech Rate this 3D modelDownload 3D modelsFileFile size Desk_Mount_Headphone_Holder___Mount___Clamp4 MB

Desk Mount Headphone Holder / Mount / Clamp free 3d print model download