3D model download
Computer Case Feet free 3d print model download
I wanted to raise my computer case up to allow more air flow through the bottom of the case. The feet are 40 mm diameter by 40 mm tall. The inner cut out is 34 mm diameter by 10 mm deep. The infill is 50% for strength.Print SettingsPrinter Brand:PrusaPrinter:P
- Model code
- 2097
5.00 USD
ABOUT THIS MODEL
Description & specifications
I wanted to raise my computer case up to allow more air flow through the bottom of the case. The feet are 40 mm diameter by 40 mm tall. The inner cut out is 34 mm diameter by 10 mm deep. The infill is 50% for strength.Print SettingsPrinter Brand:PrusaPrinter:Prusa Mk2Rafts:NoSupports:NoResolution:0.3Infill:50%Credits:DeltaWhiskey Rate this 3D modelDownload 3D modelsFileFile size Computer_Case_Feet25 KB
