3D model download
Case for Raspberry Pi 3 with Heat Sink free 3d print model download
Only the top was modified, so feel free to use any bottoms from the original thing.Instructions For Raspberry Pi Model B+ and Raspberry Pi 2 Pick one file labeled ?rpi2-bottom? and one labeled ?rpi2-top?For Raspberry Pi 3 Pick one file labeled ?rpi3-bottom? an
- Model code
- 2428
5.00 USD
Pay with USDT or USDC. We check your payment and send the files to your email or Telegram.
ABOUT THIS MODEL
Description & specifications
Only the top was modified, so feel free to use any bottoms from the original thing.Instructions For Raspberry Pi Model B+ and Raspberry Pi 2 Pick one file labeled ?rpi2-bottom? and one labeled ?rpi2-top?For Raspberry Pi 3 Pick one file labeled ?rpi3-bottom? and one labeled ?rpi2-top?. Alternatively you can use any ?rpi2-bottom? as well, but access to remove the SD card will be more restrictive.Hardware RPi to bottom: Four #4 x 1/4? sheet metal screws Alternative #1: M3 x 6mm (will be an extremely tight fit and is not recommended) Alternative #2: M2 x 6mm w/ heat set inserts (McMaster #94180A312) Top to bottom: Four #4 x 3/4? sheet metal screws (Alternative: M3 x 18mm) Alternative #1: M3 x 18mm (will be an extremely tight fit and is not recommended) Alternative #2: M2 x 18mm w/ heat set inserts (McMaster #94180A312)Credits:RobMeyer Rate this 3D modelDownload 3D modelsFileFile size Case_for_Raspberry_Pi_3_with_Heat_Sink224 KB
Case for Raspberry Pi 3 with Heat Sink free 3d print model download
