Apple style phone stand / phone holder free 3d print model download

Apple style phone stand / holder with tilt regulation.For the entire assembly you?ll need: (1x) Foot (1x) Gripper (1x) Knob (2x) Cap(1x) M6 x 40 screw (12 x 1 1/2 for the imperial folks) (1x) M6 nut?Printing? The two big parts are tricky to print. I wanted the teeth to be printed correctly so I positioned them facing upwards. And used support everywhere. (see print pic). I don?t know that this is the best method but it worked for me and print quality turned out OK. It might not be necessary, but I also used support to print the two caps and the knob.?Assembly? See attached pic for assembly instructions. You might need to excert a little bit of pressure when inserting the caps. (or glue if they?re loose).Print SettingsPrinter Brand: PrusaPrinter: i3 MK2SSupports: YesResolution: 0.2mmInfill: 10%Filament: standard PLA your choiceNotes:Print the two big parts with the teeth facing upwards using support everywhere. I also used support for the knob and the two small caps.Credits: Arcannys Rate this 3D modelDownload 3D modelsFileFile size Apple style phone stand179 KB

Apple style phone stand / phone holder free 3d print model download