8 Inch Tablet Stand free 3d print model download

I have a few extra old 8 inch tablets that I wanted to re-purpose. I happen to have two 3D printers and two little laser engravers. So I figured I?d connect the tablets directly to them as touch screens to control them. So I created a 8 inch tablet holder that has opening at the top and side for access to the ports. If you happen to have a tablet with holes on the right you can bring this design into tinkercad and use the hole tool to open up the right side. I also purchased the OTG adapter that allows me to charge the tablet at the same time I can connect usb to computer/mouse/keyboard etc.The OTG adapter is here ?> https://www.walmart.com/ip/4-Port-Micro-USB-Host-OTG-Hub-Power-Adapter-Charging-Cable-for-Android-Phone-Tablet-PC/971642870In the next few days I?m going to 3D print a holder for the OTG adapter and incorporate it into this tablet design. I?ll update this post with the OTG adapter holder link as soon as its completed.Print SettingsPrinter Brand:CrealityPrinter:CR-10Rafts:NoSupports:NoResolution:.1Infill:15Notes:I used Hatchbox PLA at a temp of 235 and a bed of 68How I Designed ThisI used Tinkercad to do the design and I inclined the tablet at a 45 degree angleCredits:dehart007 Rate this 3D modelDownload 3D modelsFileFile size 8_Inch_Tablet_Stand9 KB

8 Inch Tablet Stand free 3d print model download