3D model download
52mm Ringlight mount free 3d print model download
This is a very inexpensive and simple ring light to mount on a lens or filter with a 52mm thread. You can build two for less than $10.Because the light itself isn?t designed for high CRI and natural color, it doesn?t render color super well but is excellent fo
- Model code
- 2211
5.00 USD
ABOUT THIS MODEL
Description & specifications
This is a very inexpensive and simple ring light to mount on a lens or filter with a 52mm thread. You can build two for less than $10.Because the light itself isn?t designed for high CRI and natural color, it doesn?t render color super well but is excellent for capturing detail on small parts and is extremely portable.The light used is;https://www.ebay.com/itm/2X-HID-White-60mm-66-COB-LEDs-Angel-Eyes-Halo-Ring-Headlight-Fog-Housing-Lamp-US/252311720659?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649The only modification to the light is to trim off the small latch tabs on the plastic diffuser and provide a 12VDC source for the light. The included constant current driver allows a wide range of voltages and the light output remains constant ? no fear of overdriving the LEDs. The adapter can just be glued into the back of the diffuser ? the wires exit through the small slot at the edge of the ringPrint SettingsPrinter:Raise 3D N2 PlusRafts:Doesn?t MatterSupports:NoResolution:.1mm or lessInfill: 20%Notes:Thin layers are necessary to render the fine threads but they can be printed with a 0.4mm nozzle without and problemCredits:MDVolle Rate this 3D modelDownload 3D modelsFileFile size 52mm_Ringlight_mount246 KB
