3D model download
52mm Camera Lens Cap free 3d print model download
This is a 52mm Camera Lens Cap that i made myself. It does not require any special tools to assemble or bolts. IT is assembled entirely by pressure/friction and it holds really well on my printer. When you try it on your lens be sure that the bottom of the cap
- Model code
- 2688
5.00 USD
ABOUT THIS MODEL
Description & specifications
This is a 52mm Camera Lens Cap that i made myself. It does not require any special tools to assemble or bolts. IT is assembled entirely by pressure/friction and it holds really well on my printer. When you try it on your lens be sure that the bottom of the cap is not scratching the lens. You can glue a piece of cloth on the bottom side if you want to be safe. On the lens I tested it it was working great (Nikon 18-55mm). I AM NOT RESPONSIBLE FOR DAMAGED LENSES ? check your clearance and force. Print SettingsNotes:Part 1 and 2 are designed to be printed without supports, just be sure to orient them correctly, Part two might have to be rotated 180 degrees. Part 3 (the spring part) needs support.Credits:powermos Rate this 3D modelDownload 3D modelsFileFile size 52mm_Camera_Lens_Cap576 KB
